iSky.org – Wireless

Let’s do not go in to deep forest of why we choose the satellite Internet. Just lets take this as fact that you have it. And if you have already installed a satellite internet and you were trying to “Share” it on local network (there is no difference between wireless or wired), you probably encountered some difficulties. Indeed, the sharing of satellite (expecially asynchronous) internet has some difference with the dedicated line or ADSL access. The point is that one-side satellite Internet creates from 2 different online channels: the satellite itself (incoming) and outcoming (satellite internet commonly uses a dedicated channel, ADSL or GPRS-internet or something else).

So how to make Yandex opens on the laptop not only in the office, but also in the kitchen, a toilet, in the stool in front of the house or in the winter garden?

So lets write in details description of the setup process and the organization of a wireless network:
First, we will need to purchase some wireless equipment. This called as Access Point (AP). And … That’s all! Then connect it to your computer, where satellite Internet were installed (we will call it as PC server).
Now we need to decide to which of the providers of satellite internet we will connect. The most popular are SpaceGate, Planetsky, SkyDSL.
It is easiest to make wireless network in the case of SkyDSL: we only need to “allow” SkyDSL to distribute traffic (item Advanced in the properties of connections) and, of course, assign to the client (your Laptop) and to close server IP-address: as an option for laptops — 192.168.0.4 and for the server – 192.168.0.1. Now you just have to set Laptop Internet Explorer server address (Internet Options> Connections tab> Configuring LAN) to the port 8080. That is all. Now on your laptop Internet is on.
A bit difficult to mesh with Planetsky and SpaceGate. Then there are 2 solutions: distributed through globax, take a program for the network, such as – UserGate or WinRoute. Of course we will show both versions.
1. Through the programs
First of all set similar IP-address for server and client(your laptop): For example, for the Laptop – 192.168.0.2 and for server – 192.168.0.1. Now open the program WinRoute or UserGate and make the group of users with the IP Range from 0 to a hundred. Set as a proxy (FTP, SOCKS, HTTP) server address — 192.168.0.1 and the address — 127. 0. 0. 1. After all you just have to set in the browser’s client server (Internet Options> Connections tab>click Configure LAN) the port — 8080.
2. Through globax.
First of all it is necessary to configure globax right. On PC server have to make changes in globax.conf:
[local]
Remote = globax
Port = 192.168.0.1: 3128
Service_int = 0
[local]
Remote = globax
Port = 192.168.0.1: 1080
Service_int = 2
Address 192.168.0.1 is the IP address of your computer with DVB and globax (server) in the local area network (by default is indicated 127. 0. 0. 1).
After that, you only have to register in your browser Laptop server address (Internet Options, Connections, Configuring LAN) to the port 3128.
That’s all. And if you need to connect the TV and satellite Internet in Moscow, or to create a wireless network based on satellite internet, you should ask for help the professionals …
Much easier to deal symmetrical satellite Internet. In this situation, all parameters are set automatically.